Alba 32

PT – MAP gas sensor low pressure LPG/CNG

• n° 3 sensors: gas pressure, gas temperature and MAP
• Integrated connector
• Working pressure: 0.2 ÷ 4 bar
• Working pressure (MAP): 0,2 ÷ 2,5 bar
• Temperature sensor: 10 kΩ
• Operating temperature -40 °C ÷ 120 °C
• Gas Pipe-holder: 12 mm
• MAP Gas Pipe-holder: 5 mm
• Approval: R67-01 – R110

Hp level sensor high pressure – CNG

• CNG pressure sensor
• ø outside 50 mm
• Range 0-400 Bar
• Working range 0-260 Bar
• Working voltage from 5 to 10 V
• Output Voltage Range (pressure): 0,5 to 4,5 V
• Connection 1/4 BSP
• Approval: R110

MS Zenith reducer – CNG

• Mono stage type with diaphragms
• Adjusted pressure: 2.000 mbar relative to the intake manifold pressure
• No bleeding operation needed
• Approval: R110

Genius Max reducer – LPG

• Diaphragm single-stage type building
• Water Temperature Sensor
• Adjusted pressure: 150 kPa relative to the intake manifold pressure
• No bleeding operation needed
• Approval: R67-01

Zenith reducer – CNG

• Double stage type with diaphragms
• Water Temperature Sensor
• Adjusted pressure: 2.000 mbar relative to the intake manifold pressure
• No bleeding operation needed
• Δp adjustable between 2.000 and 2.500 mbar
• Approval: R110

One Touch changeover switch

• SMD single-stable changeover switch
• ø outside 26 mm
• Possible installations:
– built-in with ø 23 mm hole and 2 mm dimension
• With integrated Acoustic indicator (buzzer)
• N° 4 green Leds for level indication
• N° 1 bi-colour (green/red) Led for mode working indication

Gaseous phase filter – LPG

• LPG Class 2 Gaseous Phase Filter
• Operating temperature: -40 °C ÷ 120 °C
• Classification pressure: 450 kPa
• Approval: R67-01

Genius Max reducer – LPG

• Diaphragm single-stage type building
• Adjusted pressure: 150 kPa relative to the intake manifold pressure
• No bleeding operation needed
• Approval: R67-01

Genius MB reducer – LPG

• Diaphragm single-stage type building
• Adjusted pressure: 800, 1.200 or 1.500 mbar relative to the intake manifold pressure
• No bleeding operation needed
• Approval: R67-01

GP20 injector

• Impedance: 1,75 ± 5% Ω

• Operating temperature: -40 °C ÷ 120 °C

• Voltage: 8 V ÷ 16 V

• Max. gas flow rate:

Up to 8 kg/h of LPG @ 1 bar

Up to 9 kg/h of CNG @ 2 bar

• Calibrated nozzles

• Approval:

UN ECE R110-R03 – CNG

UN ECE R67-R04 – LPG

Sequent 32 gas ecu – LPG / CNG

• Automotive microprocessor 16 bit – 24 MHz
• Watertight through (IPX9K)
• According to automotive norms for protections and input/output signals
• Operating voltage: 8 V ÷ 16 V
• Maximun voltage: 24 V
• Current in stand-by: <5 μA
• Sensors and actuators diagnosis compatible with EOBD
• Communication and reprogramming with PC through K-line
• It supports KWP2000 communication protocol
• It supports CAN BUS 2.0 communication and K-line
• EMC compliant
• ECU: up to 4 injectors
• Integrated injectors cut and emulation
• Approval: R67-01, R110 and R10