Sequent Plug&Drive MY10

Sequent Plug&Drive is the LPG and CNG conversion system developed by BRC for 3- and 4-cylinder vehicles. The most important news is the gas electronic unit coming from the BRC’s strong experience in the automotive field. A further technological aim making gas system more and more performing in terms of driveability and reliability. See below for BRC systems main differences.

PDF İndir Karşılaştırmak

Gaseous phase filter – LPG

• IN and OUT gas fitting ø 12,5 mm
• Cartridge material glass fiber
• Working Pressure 0 ÷ 4,5 bar
• Operating temperature: -40 °C ÷ 120 °C
• Approval: R67-01 and R110

BRC IN03 MY09 electroinjector LPG/CNG

• Floating shutter with ultra low friction
• Impedance: 1,66 / 1,7 mH a 20 °C
• Temperature: -15°C ÷ 120 °C
• Voltage: 6 V ÷ 16 V
• Seal: Rubber on metal
• Approval: R67-01 and R110

Genius MB reducer – LPG (brass elbows)

• Diaphragm single-stage type building
• Water Temperature Sensor
• Adjusted pressure: 800, 1.200 or 1.500 mbar relative to the intake manifold pressure
• No bleeding operation needed
• Approval: R67-01

Gas ecu – LPG / CNG

• Microprocessor 16bit – 38 MHz
• Operating temperature: -40 °C + 105 °C
• According to automotive norms for protections and inlet/outlet signals
• Operating voltage: 7 V ÷ 17 V
• Max voltage: 24 V
• Sensors/actuators diagnostic compatible with OBD
• Communication Prot. KWP2000 through K-line CAN 2.0
• Aluminium case with plastic cover, totally watertight (IP67)
• Watertight 64-pin connection (IP67)
• Compliant to 2004/104/CE EMC
• Integrated spark advance processor
• It pilots up to 4 injectors
• Integrated injectors cut and emulation
• Approval: R67-01 – R110

BRC IN03 MY09 electroinjector LPG/CNG

• Floating shutter in friction total absence
• Impedance: 1,55 / 1,7 mH a 20 °C
• Temperature: -40 °C ÷ 100 °C
• Voltage: 6 V ÷ 16 V
• Seal: Rubber on metal
• Approval: R67-01 – R110

Zenith reducer – CNG

• Double stage type with diaphragms
• Water Temperature Sensor
• Adjusted pressure: 2.000 mbar relative to the intake manifold pressure
• No bleeding operation needed
• Δp adjustable between 2.000 and 2.500 mbar
• Approval: R110

Map manifold pressure sensor

• Weight: 17 grams
• Overall dimensions: ø= 22 mm, h= 63 mm with pipe-holder
• Pressure Range: 0 ÷ 2,5 bar
• Integrated connector
• Precision 1,5 % F.S.
• Operating temperature -40 °C ÷ 125 °C
• Outlet 0 ÷ 5 V

Genius Max reducer – LPG

• Diaphragm single-stage type building
• Water Temperature Sensor
• Adjusted pressure: 150 kPa relative to the intake manifold pressure
• No bleeding operation needed
• Approval: R67-01

Hp level sensor high pressure – CNG

• Gas pressure sensor
• Weight: 32 g
• Integrated connector
• Power Supply Voltage: 5 ± 0,25 VDC
• Supply Current: 20 mA MAX
• Output Voltage Range (pressure): 0,5 to 4,5 V
• Operating temperature -40 °C ÷ 135 °C
• Approval: R110

MS Zenith reducer – CNG

• Mono stage type with diaphragms
• Adjusted pressure: 2.000 mbar relative to the intake manifold pressure
• No bleeding operation needed
• Approval: R110

One Touch changeover switch

• SMD single-stable changeover switch
• ø outside 26 mm
• Possible installations:
– built-in with ø 23 mm hole and 2 mm dimension
• With integrated Acoustic indicator (buzzer)
• N° 4 green Leds for level indication
• N° 1 bi-colour (green/red) Led for mode working indication

PTS Sensata sensor (on rail) low pressure LPG / CNG

• Gas temperature and pressure sensor
• Mass: 22 g
• Overall dimensions: ø= 24 mm, h= 64,5 mm
• Integrated connector
• Power Supply Voltage: 5 ± 0,1 VDC
• Supply Current: 10 mA MAX
• Output Voltage Range (pressure): 0,5 to 4,5 V
• Operating temperature -30 °C ÷ 130 °C
• Approval: R67-01 – R110

Teknik özellikler

Supply	LPG-CNG
Cylinders	≤ 4
Gas ECU	Sequent P&D MY10
Gas ECU Connector	FCI 64 Ways
Gas Ecu Body Material	Aluminium / Plastic
Gas Shut-off Solenoid Valves	2
Reducer - Fittings inlet outlet elbows	Brass
Internal Petrol Injectors Emulation	Resistive
Gas Temp. Input	✓
Gas Pressure Input	✓
Water Temperature Sensor on Reducer	✓
N° Lambda Oxygen Input	1
RPM Signal	✓
MAP Sensor	Included
CNG Internal Timing Advance Processor (*)	✓
Communication with OBD (K and CAN)	✓
Sequential Fuel Switch OVER	✓
Injectors Rail	Aluminium
Injectors Type	IN03 MY09
Gas Level Indication	Switch

Karşılaştırmak

(*) For using CNG Timing Advance Processors please make reference to respective Sequent systems handbooks
(**) Required only for specific vehicles model

Sequent Plug&Drive MY10